Tag Archives: addition

project addition: opening up

One of the objectives of this addition project is to finally create a direct connection to the rear garden in our house.  Here’s a BEFORE shot of the current status (well, current a few weeks ago – the lilies and hydrangea are in full bloom at the moment).


If you sort of squint your eyes and ignore the general decline of the rear yard (leaning fences, sad chain link, failing retaining wall, piles of old building materials), it’s not horrible. It’s just that we never, ever hang out there. Ever. There’s a large window in the kitchen that overlooks the yard, but it’s not like we have a direct view to the garden unless we’re standing at the oven. The door to the side porch is tucked away, and there’s no great visual to the yard beyond because of that magnolia tree.

It may seem counterintuitive to reduce the amount of yard we have now in order to build a better connection to it, but the smaller footprint doesn’t bother us at all. We’ve never used our yard, but I know that we will use a garden, and for us – smaller is better. I’m ready for a courtyard garden, with more privacy, a thoughtful layout, and the opportunity to move freely between inside and outside.

There are two other components to our location that have to factor in here – summer heat + humidity and mosquitos. So there is a degree of shading and easing into the outdoors that needs to occur as well. We may want to feel like we’re outside more, but the reality of summer life in this city is that it’s not always the most pleasant outdoors. Getting some air movement and controlling the light and heat as it enters the new space will be really important considerations.

Here’s a peek into an older version of the addition model. It’s changed quite a bit in the process of working on the construction drawings, but this is a good view to get the overall concept.


We want that rear wall of the addition to have as much glass as possible, but we also want the ability to open the entire space up to the outdoors, with a terrace and gardens between the addition and the new alley house/garage. We’re hoping to use a NanaWall system in this opening, similar to this.


My one hangup on this idea has been the screening options. This looks really lovely in the land of no Zika virus. We’ve got big, nasty river mosquitos in our real world, plus I feel like screens offer an added layer of privacy – a bit of a visual separation but not a visual barricade. It was nice to have the rep into the office today to talk about the system, and to see the screen option available. I had looked at other screening options (like motorized screens that drop from a pocket in the ceiling, or the coiling spring loaded screens – some that are pleated), but none of these were really ideal. If we’ve opened up the entire rear wall of the addition, we’ll want to move freely in and out of it without raising and lowering an entire wall of screening.

The NanaWall Screen ONE system is pretty cool in that it allows you to slide it open and shut as much or as little as you want – and it stops sliding when you stop sliding. So you can have the entire wall open, the screen completely closed, and then slide the door a few feet to exit or enter. The glass portion of the system will have a swing door component as well – so you can just swing open a door rather than open the entire wall to exit and enter. If we just wanted to throw open the swing door for a little fresh air, we could pull the screen out to cover that opening and provide insect control where we need it. Here’s a cool video if you want to see it.

The other benefit of installing a NanaWall system on the house? My wardrobe and posing skills are going to vastly improve as a result of it. Also, my view. Mountains and oceans for everyone!!

images (1)

windows-and-doors (1)

images (2)

admiring: artifox desks


I recently found out about a local company, Artifox, and their gorgeous desks. I love every single detail – the removable writing surface on the end, the super strong magnetic pegs (and peg holder) that can be positioned to hold objects like books in place.

artifox-standing-desk-01-6.jpg.650x0_q70_crop-smart artifox_desk_01_3

I love the integrated device holder, and the way power strips and cords are controlled within the piece.

Artifox_Walnut_Desk_Tray Standing-Desk-01-by-Artifox-6

And I’m always a sucker for a well placed peg.


At my previous job, we still drew everything by hand. We had large standing drafting tables with tall stools. We kept the tools we needed most to the right or left of the parallel bar cables, and attached hooks to the edge of the desk to hold electric erasers and triangles and circle templates. I still really miss those drawing days. I can look down at the callouses on my fingers and remember them quite clearly.


I’m taking lots of mental (and real) notes on how our new kitchen will be laid out. The piece I’m most excited about designing is the central island – I’d like for it to be movable, and transition from kitchen to dining room if necessary. I’d also like for it to be adjustable in height, break into pieces for maximum flexibility, tuck away when not needed. And like a transformer – ready to be anything and everything at a moment’s notice: dinner prep, homework station, cookie factory, dinner buffet, and a beautiful backdrop for all things delicious. 


I’m rambling a bit off the subject (big surprise), but the things that I see in things that I like are usually the result of a rigorous design process. You can just tell when an object emerges from this process – it’s not difficult to imagine the dozens, hundreds, thousands of ideas, sketches, prototypes that came before it.


I’m looking forward to following this group and watching what they unfold next. Feeling encouraged and inspired to continue thinking about objects and space within our house as a design opportunity rather than merely expanding our house as an opportunity to fill space with uninspiring things.


project addition: week seven

Thanks for your patience during Flu Week + Spring Break Week! Now it’s time to get back to work. I have some upcoming goals for this project, and one of them is for M and I to set up a meeting with someone in the building department to get an idea of the process in front of us. We know we’ll be applying for a variance since we have such a narrow lot to start with it, and the current building setback lines make constructing an addition or a garage impossible without encroaching upon them. Because we’re in an historic district, we’ll also have to get additional approvals for our project. Once we’ve had this preliminary meeting I’ll write a post on the details of the process ahead of us.

In my last post I mentioned a few of the “problems” with our existing house that we need to address with our new addition. These are different than the objectives we have for the new space; these are real issues that are going to need to be addressed at some point no matter how big or small this project ends up being.

Basement Access
Rear Wall Issues
Alley Retaining Wall Failure

Perimeter Fence Disrepair

In this post I’m going to tackle the first one.

Basement Access: There is no interior stair to the basement of our house. We had the option to install one when we inserted the interior stair between the floors of our house the first time (remember, there was just an exterior stair when the house was a two-family), but we opted not to because it would have eaten up most of the floor space in the middle room of our house. The outdoor access isn’t the end of the world – although it’s not a lot of fun during rainy tornado warnings in the middle of the night. We don’t need to access anything in our basement on a daily basis, and the separation is sort of nice because it’s really not “living” space.

But… the exterior stair is in really rough condition and we haven’t made any real changes to it since we moved in. The reason we haven’t is that a new areaway for the stair would need to be almost twice as large to meet current codes, not to mention the required guardrails and handrails we’d need to install. We considered installing a basement hatch similar to this, especially when the girls were younger and we worried about them playing outside and falling down into the death trap, but they are expensive and we put it off because it’s hard to sink money into something that you will likely eventually get rid of.

Any addition we add will need to accommodate a new stair to access the existing basement since we’ll be building right over the old one. That means either building a new exterior one (option 1) that will eat up most of our remaining courtyard space, or incorporating a new interior stair (option 2) between the first floor of the addition and the addition’s basement. (I suppose a third option could be installing an interior stair under our existing one in the current dining room, but that would require major structural work to the existing house, and so that is off the table.)

There are several positive gains from incorporating an interior stair into the addition:
  • Safe, dry access to a storm shelter – a definite plus living in the twister prone Midwest.
  • An opportunity for a new basement room with decent head height and a direct connection to the dining room / gathering space above. We plan to host more things at our house with real space to accommodate more than a few people at a time. It would be great to have a place to gather for dinner, with an adjacent breakout space for kids just below. Their current rooms are really far away from the first floor action!
  • A clean connection to the outdoors at ground level, gaining one of our objectives – a mud room!

You might remember this early sketch I did that showed a new interior stair to the basement in the addition.


Here’s a really simple diagram of the first floor with that idea. You can see the original rooms of the house, what I’m calling the “link” which is just the connection piece between the old house and the addition which will be mostly glass, and the addition. The red area represents the zone along the west side of the house that is right on our property line. It would house the main galley kitchen and the new stair. The existing first floor side porch would become a pantry and would have a new side entry that could act as a new mudroom.


And here’s the basement diagram for that idea – the addition would have a full basement, and there would be a connection to the existing basement from it. (Again, the stair area shown in red.)

This idea seemed really neat and clean and the only way to work a stair into a limited space – stairs take up a lot of room! But it always bothered me a little bit in that location. The side entry into a mudroom area was nice, but it was still a long walk from the garage and I could see us shortcutting on cold and messy days directly into the dining room. Do we try to accommodate some storage at that rear entry? Then it seems like we’re just moving the current issues we have in the living room – we have no buffer zone in our house between the outside and the inside. I really want the addition to be clean and open and clutter free. Even if we did use that new mudroom and side entry, it’s still tiny, and spills into the most pinched part of our downstairs plan.

M threw out the idea of inserting a stair in the opposite direction – in the link between the old and the new. We don’t have the room to have a single run stair there, but if we had a stair with an intermediate landing we could enter at ground level and incorporate a more generous mudroom off to the side – not a lot bigger than in the previous idea, but here it’s tucked away and not also serving as a corridor with two doorways.


The mudroom would be at that new intermediate level, and you’d come up five stairs to the addition. This “link” would be mostly glass, and the stair here could be a really beautiful thing with glass above letting in a ton of light to the house. Even though everything will still be very open, there’s a visual separation between the entry space and the house space above. I think I love it.

The new basement in the addition will have a taller ceiling height than our current basement, and the link will allow us to connect the new to the old without undermining the existing foundation – we’re staying far away from that wall with any excavation.


Here are some quick views of how that stair might look in the model. Right now everything in the model is very schematic in nature, so just look at it as a massing model right now without a lot of detail. In the image below, the addition is on the left. Entryway is mostly glass and the roof will be glass along this link as well. The whole west wall that was going to be kitchen and stair will now be kitchen and something else – probably seating in the dining room – I have some ideas for that coming up, but right now it’s just shown as this blocky area.

Here’s a view looking the other direction, addition on the right.


View of that new intermediate landing with mudroom adjacent.


And basement view with the first floor peeled off – new addition would have a deeper basement. You can see the existing door to the basement straight ahead.


I’m really excited about where this idea led us. We make a good team.

Meeting adjourned.